News

Contact Us

  • The contact: Mason.Lee
  • Telephone: +8615603174040
  • Mobile phone: +8615603174040
  • Address: Yongfeng Road Shizhuang Industry Area Renqiu City,Hebei province,China
  • Mail editor: 062550
  • Skype: masonjonny
  • Whatsapp: +8615603174040
  • Email: carbide-86@hotmail.com
  • Website: https://www.carbide-86.com/

Your Position:   Home > News > Industry News

Learn about carbide heads

 
Ball End - Used to mill die cavities and fillets, round bottom holes and slots.
 
Carbide - This tool material combines increased stiffness with the ability to operate at higher SFPM. Carbide tools are best suited for shops operating newer milling machines or machines with minimal spindle wear. Rigidity is critical when using carbide tools. Carbide end mills may require a premium price over the cobalt end mills, but they can also be run at speeds 2 1/2 faster than HSS end mills. For best results mount in a hydraulic type holder.
 
Corner Radius - Conventional end mill with radius ground on the tips of the flutes to help reduce chipping on the tip. For mold applications, radius tools can remove more material faster than ball ends.
 
Corner Rounders - Cutters having form ground radius with relieved clearance.
 
Double End - An end mill that has teeth on both ends of the cutter. End mill holders must have sufficient clearance to allow for the use of a double end cutter.
 
Drill Point - Multipurpose tool which can be used for drilling, milling, or chamfering.
 
High Helix - Usually a 40 to 60 degree spiral on the tool's flutes. Effective for rapid chip ejection in milling of aluminum and other materials.
 
Left-Hand Spiral - Used for milling multiple layers of thin sheets where chip flow is directed away from work.
 
Rougher (Hoggers) - End mill with interrupted shape on outside diameter to remove large amounts of material quickly. Typically can remove material up to three times the rate of conventional end mills with different types available to achieve the desired finish on the material.Zhuzhou tongda offers roughers in Coarse Pitch, Fine Pitch, Rougher/Finisher, and 3-Flute for Aluminum styles.